Mohammad Reza Salimi

Sample image

 

Assistant Professor

Ph.D.  in Aerospace Engineering

Dissertation: Heat Transfer Analysis of Porously Covered Heated Surfaces, Using Hybrid N-S-LB Method

 

M.Sc. in Aerospace Engineering 

Thesis: Computational Simulation of Turbulent Incompressible Film Cooling with Consideration of Jet and Cross Flow Density and Viscosity Differences

 

B.Sc. in Aerospace Engineering

Senior project: 

 

Google scholar address

Tel: +989126340925

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Web Site Address: http://ari.ac.ir/salimi

 


Research Interests 

  • Turbulence Modeling
  • Computational Fluid Dynamics
  • Lattice Boltzmann Method
  • Plasma Dynamics
  • Aerospace Propulsion
  • Aerodynamic Heating
  • Combustion
  • Biomechanics 
  • Multiphase Modeling

 

 

Publications

 Journal Papers:

  1. Salimi, MR., Ramezanizadeh, M., Taeibi-Rahni, M., and Farhadi-Azar, R., “Film Cooling Effectiveness Enhancement Applying another Jet in the Upstream Neighbor of the Main Jet, Using LES Approach” Journal of Applied Fluid Mechanics (JAFM), Year 2016, volume 9, Issue 1, Pages 33-42. 
  2. Goodarzi-Ardakani, V., Taeibi-Rahni, M., Salimi, M.R., and Ahmadi, G., “Computational Simulation of Temperature and Velocity Distribution in Human Upper Respiratory Airway during Inhalation of Hot Air” Respiratory Physiology & Neurobiology, Year 2016, Volume 223, Pages 49-58. 
  3. Salimi, MR., and Taeibi-Rahni, M., “New Lifting Relations for Estimating LBM Distribution Functions from Corresponding Macroscopic Quantities, Based on Equilibrium and Non-Equilibrium Moments”, Journal of Computational Physics, Year 2015, Volume 302, Pages 155-175. 
  4. Salimi, MR., Taeibi-Rahni, M., and F. Jam, “Heat Transfer Analysis of a Porously Covered Heated Square Cylinder, using a Hybrid Naviere-Stokes-Lattice Boltzmann Numerical Method”, International Journal of Thermal Sciences, Year 2015, Volume 91, Pages 59-75.
  5. Salimi, MR., Taeibi-Rahni, M., and F. Jam, “Pore-scale Simulation of Fluid Flow Passing over a Porously Covered Square Cylinder Located at the Middle of a Channel, Using a Hybrid MRT-LBM–FVM Approach”, Theoretical and Computational Fluid Dynamics (TCFD), Year 2015, Volume 29, Issue 3, Pages 171-191.
  6. Nirooi, H., Salimi, M.R., Taeibi-Rahni, M., and Mahdavimanesh, M., “Computational Simulation of Flow over a Cylinder in Ground Effect, Using PANS”, Life Science Journal, Year 2013, Volume 10, Pages 195-202.
  7. Farhadi-Azar, R., Ramezanizadeh, M., Taeibi-Rahni, M., and Salimi, MR.,  “Compound Triple Jets Film Cooling Improvement Via Velocity and Density Ratios: Large Eddy Simulation” Journal of Fluids Engineering (ASME), Year 2011,   Volume 133, Issue 3.
  8. Salimi, MR., Farhadi-Azar, R., Taeibi-Rahni, M., and Ramezanizadeh, M., “An Innovation in Film Cooling of the Gas Turbine Blades, Applying an Upstream Jet" Journal of Aerospace Science and Technology [JAST], Year 2012, Volume 9, Issue 1.
  9. Kamali-Moghadam, R., Salimi, MR., “Equilibrium Effects on the Hypersonic Laminar Boundary Layer Flow over Axisymmetric Bodies”, Journal of Space Science and Technology (JSST), Year 2016, Volume 8, Issue 4, Pages 17-25.
  10. Amiri-Hezaveh, A., Salimi, MR., and Taeibi-Rahni, M., “Phenomenological Study of Droplet Behavior Passing through a Porous Medium at Pore-scale, Using Lattice Boltzmann Method”, Fluid Mechanics & Aerodynamics Journal, Year 2016, Volume 5, Issue 2, Pages 1-13 (In Persian). 
  11. Amiri-Hezaveh, A., Salimi, MR., and Taeibi-Rahni, M., “Numerical Analysis of same scale Droplet-Particle Interaction Inside a Porous Medium, Using Lattice Boltzmann Method”, Accepted in Journal of Amirkabir Mechanical Engineering, DOI: 10.22060/MEJ.2017.11848.5198 (In Persian). 
  12. Hosseini, N., Salimi, MR., and Taeibi-Rahni, M., “Evaluating the Partially Averaged Navier-Stokes Approach (PANS) for Simulating Turbulence Flow around a Gas Turbine Blade”, Journal of Amirkabir Mechanical Engineering, Year 2016, Volume 48, Issue 3, Pages 267-280 (In Persian). 
  13. Kamali-Moghadam, R., Noori, S., Salimi, MR., Sheida, M., Hoseini, A., "An Evaluation on Numerical Solution of Boundary Layer Equations and Engineer Approach on Aero-heating Analysis of Axi-Symmetric Re-entry Vehicles", Journal of Space Science and Technology, Year 2013, Volume 6, Issue 3, Pages 39-48 (In Persian).
  14. Farhadi-Azar, R., Ramezanizadeh, M., Taeibi-Rahni, M., and Salimi, MR., “An Investigation on the Velocity Ratio Difference Between Main jet and Secondary jets on Film Cooling Effectiveness in Compound Triple Jets Configuration, Using LES”, Journal of Aerospace Sciences, Year 2013, Volume 1, Issue 1, (In Persian).
  15. MR. Salimi, M. Taeibi-Rahni, M. Ramezanizadeh, and R. Farhadi-Azar, “Investigation of Density Ratio Effects on Flow Hydrodynamics and Convective Heat Transfer Coefficient in Film Cooling Problem” Journal of Aerospace Sciences, Year 2012, Volume 2, Issue 2 (In Persian). 
  16. MR. Salimi, M. Taeibi-Rahni, M. Ramezanizadeh, and R. Farhadi-Azar, “Application of   Turbulence Model in Investigation of Film Cooling of a Flat Plate” Journal of Aeronautical Engineering, Year 2011, Volume 13, Issue 1, Pages 53-62 (In Persian). 

 

 

 Books:

 Book Chapters:

 Conference Papers:

 

  1. Salimi, MR.,  R. Farhadi-Azar, M. Ramezanizadeh, and M. Taeibi-Rahni, “Numerical Simulation of The jet into Cross Flow Problem, Using the v^2 f-kω Turbulence Model” The 8th Annual Iranian Aerospace Society (IAS) Conference, February 2009, Isfahan, Iran (In Persian).
  2. Farhadi-Azar, R., Salimi, MR., Ramezanizadeh, M., and Taeibi-Rahni, M. “Hydrodynamic Analysis of Compound Triple Jet Problem, Using Large Eddy Simulation Approach”, The 8th Annual Iranian Aerospace Society (IAS) Conference, February 2009, Isfahan, Iran (In Persian).
  3. Farhadi-Azar, R., Salimi, M.R., Ramezanizadeh, M., and Taeibi-Rahni, M., “Investigating the Effects of Flow Velocity Differences Between Controlling Jets and the Main Jet on the Film Cooling Effectiveness in the Compound Triple Jet Problem” The 8th Annual Iranian Aerospace Society (IAS) Conference, February 2009, Isfahan, Iran (In Persian).  
  4. Salimi, M.R., Farhadi-Azar, R., Ramezanizadeh, M., and Taeibi-Rahni, M., “Investigating the Effects of Jet into Cross Flow Density Ratio on the Flow Hydrodynamic and Film-Cooling Effectiveness” The 17th Annual International Conference on Mechanical Engineering at Iranian Society of Mechanical Engineers (ISME), May 19-21, 2009, Tehran, Iran (In Persian).
  5. Farhadi-Azar, R., Salimi, MR., Ramezanizadeh, M., and Taeibi-Rahni, M., “Numerical Investigation of Film-Cooling Problem on Compound Triple Jets, Using LES Approach” The 17th Annual International Conference on Mechanical Engineering at Iranian Society of Mechanical Engineers (ISME), May 19-21, 2009, Tehran, Iran (In Persian).
  6. Farhadi-Azar, R., Salimi, MR., Ramezanizadeh, M., and Taeibi-Rahni, M., “Investigating the Effects of Density Ratio on Flow Hydrodynamics and Film-Cooling Effectiveness in Compound Triple Jets” The 12th Iranian Fluid Dynamics Conference, April 28-30, 2009, Babol, Iran (In Persian).
  7. Salimi, MR., Soltani, E., Khosravi, P., and Salarieh, H., “An Study on the Aerodynamic Stability of the Tondar-90 Under Strong Cross Wind” The 18th Annual International Conference on Mechanical Engineering at Iranian Society of Mechanical Engineers (ISME), May 11-13, 2010, Tehran, Iran (In Persian).
  8. Nirooi, M.H., Salimi, M.R., and Taeibi-Rahni, M., “An Study on the Flow Characteristics, around a Cylinder Near the Surface, Using Very Large Eddy Simulation (VLES)” The 10th Annual Iranian Aerospace Society (IAS) Conference, February 8-10, 2011, Tehran, Iran (In Persian).
  9. Kamali-Moghadam, R. and Salimi, M.R, "Hypersonic Boundary Layer Flow Analysis around Axi-symmetric Reentries, Using Integral Matrix Method" The First National Aerodynamics & Hydrodynamics Conference, October16-17, 2012, Tehran, Iran (In Persian).
  10. Kamali-Moghadam, R.  and Salimi, MR., "Effects of Turbulence Models in Boundary Layer Simulation around Axi-symmetric Re-entry Vehicles" The 12th Annual Iranian Aerospace Society (IAS) Conference, February 19-21, 2013, Tehran, Iran (In Persian).
  11. Kamali Moghadam, R., Salimi, MR., “Integral Matrix Procedure for Laminar Boundary Layer Flow over Axisymmetric Bodies with Real Gas Effects”, 15th International Conference of Fluid Dynamics, Hrmozgan Univercity, 17-19 Decenber 2013, Hrmozgan, Iran.
  12. Alizadeh-Seresht, E., Salimi, MR., Taeibi-Rahni, M., and Nezam-Abadi, A., "Numerical Simulation of Heat Transfer Between Two Separate Channel, Using a Combined FVM-LBM" The 18th Annual International Conference on Mechanical Engineering at Iranian Society of Mechanical Engineers (ISME), May 7-9, 2013, Tehran, Iran (In Persian).
  13. Alizadeh-Seresht, E., Salimi, MR., Taeibi-Rahni, M., and Nezam-Abadi, A., "Conjugated Heat Transfer Modeling from Rectangular Fins, Using MRT Lattice Boltzmann Method" National Conference on Mechanical Engineering, May 30, 2013, Malayer, Iran (In Persian).
  14. Alizadeh-Seresht, E., Salimi, MR., Taeibi-Rahni, M., and Nezam-Abadi, A., "Conjugated Heat Transfer Modeling in a Channel, Using Lattice Boltzmann Method", National and Joint Convention on Computer Engineering and Mechanics, May 8, 2013, Miandoab, Iran (In Persian).
  15. Haghshenas, M., Taeibi-Rahni, M., and Salimi, M.R., "Lattice Boltzmann Simulation of Binary Droplet Collision Dynamic, Using Index Function Model" 7th Student Conference on Mechanical Engineering (STU2013), February 19-21, 2013, Tehran, Iran.
  16. Vakili, N., Taeibi-Rahni, M., Eftekhari-Yazdi, M., and Salimi, MR., “Numerical Simulation of Conjugated Heat Transfer from Printed Circuit Boards Using LBM” The 18th Annual International Conference on Mechanical Engineering at Iranian Society of Mechanical Engineers (ISME), May 7-9, 2013, Tehran, Iran, (In Persian).
  17. Kamali-Moghadam, R., and Salimi, MR., "Numerical Solution of 3D Laminar Boundary Layer Equations, Using Axi-symetric Analogy in Hypersonic Flows", The 13th Annual Iranian Aerospace Society (IAS) Conference, Aero2014P517T107, 2013, Tehran, Iran (In Persian).
  18. Etemadi, F., Rasi, F., and Salimi, MR., "Aerodynamic Analysis of Extendable Speed Brakes", The 13th Annual Iranian Aerospace Society (IAS) Conference, Aero2014, 2013, Tehran, Iran (In Persian).
  19. Salimi, M.R., Taeibi-Rahni, M., and Jam, F., "Investigating Turbulence Flow Around 2D Cylinder, Using Hybrid FVM-LBM Method and RANS Approach" The 13th Annual Iranian Aerospace Society (IAS) Conference, Aero2014P118T107, 2013, Tehran, Iran (In Persian).
  20. Zakeri, R., Lee, E.S., Salimi, M.R., “LBM Simulation of Electro-Osmotic Flow (EOF) in Nano/Micro scales Porous Media with an Inclusive Parameters Study”, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE2014), November 14-20, 2014, Montreal, Quebec, Canada.
  21. Jazirian, H., Taeibi-Rahni, M., Salimi, M.R., “Numerical simulation of Film Cooling, using Algebraic Non-isotropic turbulence Model”, National Conference on Science and Technology's mechanical and electrical engineering, June 8, 2017, Tehran, Iran (In Persian).

 

 

 

Teaching Experiences

 Undergraduate

  •  Flight Mechanics

 Graduate

  • Computational Fluid Dynamics
  • Grid Generation 

Research Supervision

  

 

 

Professional Experiences

 

 

 

 
 
You are here: ARI About ARI People Faculty Mohammad Reza Salimi